User Rating: 5 / 5

Details

Category: Projects/DIY

Published: Monday, 18 May 2015 22:45

MV8000 LCD/MOUSE PINOUT INSTRUCTIONS

VGA CHART

name cable color

1- red signal cable (thick) - red / *pink

2-green signal cable (thick) - green / *grey

3-blue signal cable (thick) - *blue

4- id monitor 2 / ground - sheild / (sometimes black)

5- digital ground gnd - *exposed sheild (sometimes green)

6- red rtn gnd - *exposed sheild (sometimes red)

7- green return gnd - *exposed sheild (sometimes green)

8- blue return gnd - *exposed sheild (sometimes blue)

9- no pin/key/+ 5v dc - no pin (you are not using this connection)

10- ground with sheilding - black (somtimes red / *orange)

11- id bit 0 - (you are not using this connection)

12- id bit 1/data - *white

13- horizantal sync - *brown

14- vertical sync - *yellow

15- id bit/clock - *green

MOUSE CHART - (intellimouse 1.3a ps/2 only - your mouse wiring may be different)

orange - data - 1

white - +5dc - 4

yellow - clock - 5

blue - ground - 3

CONNECTION - STEPS

RED IS CN1 -- LEFT TO RIGHT

there are 16 connections use red wire as your starting point inside the mv8000 and go left to right counting each wire

then follow the chart above for your connections , this diagram is is for cut wires and exposed wiring

step 1 -- #1 red connect to #4 (+ 5 volts) mouse

step 2 -- #2 white connect to #6 (nothing) mouse

step 3 -- #3 white connect to #2 (nothing) mouse

step 4 -- #4 white connect to #5 (clock) mouse

step 5 -- #5 white connect to #1 (data) mouse

step 6 -- #6 white connect to #3 (ground- mouse) & #12 vga ground

step 7 -- #7 , #11 , #13 connect to vga #5 (ground)

step 8 -- #8 white connect to #15 vga (monitor id)

step 9 -- #9 white connect to #13 vga (horizontal sync)

step 10 -- #10 white connect to #14 vga (vertical sync)

step 11 -- #12 white connect to #1 vga red/pink thick wire(video)

step 12 -- #14 white connect to #2 vga green/grey thick wire(video)

step 13 -- #15 grey connect to vga #10 (sync ground)

step 14 -- #16 white connect to #3 vga blue thick wire(video)

note- 1--connect wires #7, #11,#13 together then connect them to #5 vga exposed sheild ground(you just need a ground)

connect mv #6 white to mouse #3 ground and to vga #12

note- 2--if you have monitor problems (not showing) then connect #6 white,#3 mouse,#12 vga,#10 vga,#15 (grey) and make 1 full ground connection

your are now connected ---

press shift exit on your mv8000 to activate the monitor

make sure your mouse is working first

you will see the monitor connected icon in the corner of yor mv screen

REALREEM